3com S7906E Guía De Referencia

 

1-18 

# Display information about all NHLFE entries. 

<Sysname> display mpls nhlfe 

Out-Interface       Token      Oper     Nexthop         Deep Stack 

---------------------------------------------------------------------- 

Vlan2                 2         PUSH     88.1.1.2        1    1024 

Table 1-9 display mpls nhlfe command output description 

Token NHLFE 

entry 

index 

Oper Operation 

type 

Deep 

Depth of the MPLS label stack 

Stack MPLS 

label 

 

display mpls route-state [ vpn-instance vpn-instance-name ] [ dest-addr mask-length ] 

Any view 

1: Monitor level 

vpn-instance vpn-instance-name: Specifies routes of a VPN instance. The VPN instance name is a 

case-sensitive string of 1 to 31 characters. 

dest-addr mask-length: Specifies routes to a destination address. The mask length is in the range 0 to 

32. 

Use the display mpls route-state command to display LSP-related route information. 

With no VPN instance specified, the command displays information about the routes of the public 

network instance. 

# Display LSP-related information about all routes. 

<Sysname> display mpls route-state 

DEST/MASK   NEXT-HOP    OUT-INTERFACE  STATE LSP-COUNT  VPN-INDEX 

----------------------------------------------------------------- 

1.1.1.1/32  10.0.0.1    Vlan2           ESTA  1           0