3com S7906E 参照ガイド
1-19
Field
Description
CNI port link indication polarity: high
Polarity of the CNI (System) port link indication
clock
clock
EPON tbc polarity: low
Polarity of output TBC clock for the TBI bus
Discovery laser on time: 32
Laser on time adjustment to the ONUs during the
discovery process, if any
discovery process, if any
Discovery laser off time: 32
Laser off time adjustment to the ONUs during the
discovery process, if any
discovery process, if any
EPON Tx signal: disable
The OLT PON Tx signal (disable or enable)
When the signal is disabled, no data is
transmitted on the PON
encryption timer
Syntax
encryption timer { update-time update-time | no-reply-timeout timeout }* slot slot-number
undo encryption timer slot slot-number
View
FTTH view
Default Level
2: System level
Parameters
update-time: Key update time, in seconds. It is in the range 1 to 255 and defaults to 10.
timeout: Encryption reply timeout time, in a unit of 100 ms. It is in the range 1 to 2550 and defaults to 30.
slot-number: Slot number of the EPON card.
Description
Use the encryption timer command to configure the key update time and encryption reply timeout time
of the encryption.
Use the undo encryption timer command to restore the key update time and encryption reply timeout
time of the encryption to the defaults.
Related command: display epon-parameter..
The encryption reply timeout time must be less than or equal to 10 times the key update time.