3com S7906E 참조 가이드

 

1-19 

CNI port link indication polarity:        high 

Polarity of the CNI (System) port link indication 
clock 

EPON tbc polarity:                        low 

Polarity of output TBC clock for the TBI bus 

Discovery laser on time:                  32 

Laser on time adjustment to the ONUs during the 
discovery process, if any 

Discovery laser off time:                 32 

Laser off time adjustment to the ONUs during the 
discovery process, if any 

EPON Tx signal:                           disable 

The OLT PON Tx signal (disable or enable) 

When the signal is disabled, no data is 

transmitted on the PON 

 

encryption timer { update-time update-time | no-reply-timeout timeout }* slot slot-number 

undo encryption timer slot slot-number 

FTTH view 

2: System level 

update-time: Key update time, in seconds. It is in the range 1 to 255 and defaults to 10.  

timeout: Encryption reply timeout time, in a unit of 100 ms. It is in the range 1 to 2550 and defaults to 30.  

slot-number: Slot number of the EPON card.  

Use the encryption timer command to configure the key update time and encryption reply timeout time 

of the encryption.  

Use the undo encryption timer command to restore the key update time and encryption reply timeout 

time of the encryption to the defaults.  

Related command: display epon-parameter.. 

 

The encryption reply timeout time must be less than or equal to 10 times the key update time.