3com S7906E 参照ガイド
1-37
log-peer-change
Syntax
log-peer-change
undo log-peer-change
View
BGP view
Default Level
2: System level
Parameters
None
Description
Use the log-peer-change command to enable the global BGP logging on peers going up and down.
Use the undo log-peer-change command to disable the function.
By default, the function is enabled.
Examples
# Enable BGP logging on peers going up and down.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] log-peer-change
network (BGP/BGP-VPN instance view)
Syntax
network ip-address [ mask | mask-length ] route-policy route-policy-name
undo network ip-address [ mask | mask-length ]
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
ip-address: Destination IP address.
mask: Mask of the network address, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
route-policy-name: Routing policy applied to the route. The name is a string of 1 to 19 characters.