Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-37 
log-peer-change 
Syntax 
log-peer-change 
undo log-peer-change 
View 
BGP view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the log-peer-change command to enable the global BGP logging on peers going up and down.  
Use the undo log-peer-change command to disable the function. 
By default, the function is enabled. 
Examples 
# Enable BGP logging on peers going up and down. 
<Sysname> system-view 
[Sysname] bgp 100 
[Sysname-bgp] log-peer-change 
network (BGP/BGP-VPN instance view) 
Syntax 
network ip-address [ mask | mask-length ] route-policy route-policy-name  
undo network ip-address [ mask | mask-length ] 
View 
BGP view/BGP-VPN instance view  
Default Level 
2: System level 
Parameters 
ip-address: Destination IP address. 
mask: Mask of the network address, in dotted decimal notation. 
mask-length: Mask length, in the range 0 to 32.  
route-policy-name: Routing policy applied to the route. The name is a string of 1 to 19 characters.