Xerox 100 ユーザーガイド
Troubleshooting Guide
2-1
2.
Fault masking
This chapter describes the behavior of the 96/4635/180 NPS/IPS
while printing with fault conditions.
while printing with fault conditions.
The DocuPrint 96, 4635, and 180 NPS/IPS enable you to
continue printing while certain faults or conditions exist in parts
of the printer that are not currently in use. Such faults or
conditions are said to be masked. An example of a masked fault
condition is when feeder tray 1 is in use and feeder tray 2 is
jammed, or stacker bin B is full.
continue printing while certain faults or conditions exist in parts
of the printer that are not currently in use. Such faults or
conditions are said to be masked. An example of a masked fault
condition is when feeder tray 1 is in use and feeder tray 2 is
jammed, or stacker bin B is full.
When there is a masked fault or condition, the Hint icon (a light
yellow circle with an asterisk inside) appears on the printer
console and the goes on. A message, preceded by an asterisk,
also appears in line 3 of the message area of the printer console.
To display the area containing the masked fault, touch the Fault
List Icon (shown below) on the printer console. The Fault List
Icon appears.
yellow circle with an asterisk inside) appears on the printer
console and the goes on. A message, preceded by an asterisk,
also appears in line 3 of the message area of the printer console.
To display the area containing the masked fault, touch the Fault
List Icon (shown below) on the printer console. The Fault List
Icon appears.
Figure 2-1. Fault List icon