Gestetner dsc332 操作ガイド
Appendix
104
9
Direct printing port
The direct printing port allows print-
ing directly from a computer, con-
nected to the network, to the printer.
Use the "diprint" command to change
direct printing port settings.
ing directly from a computer, con-
nected to the network, to the printer.
Use the "diprint" command to change
direct printing port settings.
❖
❖
❖
❖ View settings
The following command displays
the current direct printing port set-
tings:
the current direct printing port set-
tings:
msh> diprint
Example output:
Example output:
port 9100 timeout=300(sec)
bidirect off
bidirect off
• “Port” specifies the port number
of the direct printing port.
• The “bidirect” setting indicates
whether the direct printing port
is bidirectional or not.
is bidirectional or not.
❖
❖
❖
❖ Setting timeout
You can specify the timeout inter-
val in use when receiving data
from the network.
val in use when receiving data
from the network.
msh> diprint timeout
[30~65535]
[30~65535]
Note
❒ The default is 300 seconds.
❖
❖
❖
❖ Bidirectional configuration for the di-
rect printing port
Use this setting to configure
whether the direct printing port is
bidirectional or not. The default is
“off”.
whether the direct printing port is
bidirectional or not. The default is
“off”.
msh> diprint bidirect
{on | off}
{on | off}
Note
❒ If you select [on], SmartNet-
Monitor for Client or Standard
T C P / I P o n W i n d o w s 2 0 0 0
might not work correctly.
T C P / I P o n W i n d o w s 2 0 0 0
might not work correctly.
Netware
Use the " netware " command to con-
figure the NetWare settings such as
the print server name or file server
name.
figure the NetWare settings such as
the print server name or file server
name.
msh> netware parameter
Parameter
Settings
pname
Enter the NetWare print serv-
er name using up to 47 char-
acters.
er name using up to 47 char-
acters.
fname
Enter the NetWare file server
name using up to 47 charac-
ters.
name using up to 47 charac-
ters.
encap
[802.3/802.2
/snap/
ethernet2/
auto]
[802.3/802.2
/snap/
ethernet2/
auto]
Select the encap type.
rnum
Specify the remote printer
number.
number.
timeout
Set the timeout.
mode
pserver
pserver
mode ps
Select the print server mode.
mode
rprinter
rprinter
mode rp
Select the remote printer
mode.
mode.
context
Specify the NDS context
name.
name.
sap_interva
l
l
Specify the SAP intervals.
Each interval can be set to be-
tween 0 and 3600 seconds in
one-second increments.
Each interval can be set to be-
tween 0 and 3600 seconds in
one-second increments.
login server Specify “login with a selected
file server” as the login mode.
login tree
Specify “login with a selected
NDS tree” as the login mode.
NDS tree” as the login mode.
tree NDS
tree name
tree name
Select the NDS tree to log on
to.
to.