Gestetner dsc332 Operating Guide

Appendix

104

The direct printing port allows print-
ing directly from a computer, con-
nected to the network, to the printer.
Use the "diprint" command to change
direct printing port settings.

❖

❖

❖

❖ View settings

The following command displays
the current direct printing port set-
tings:

msh> diprint
Example output:

• “Port” specifies the port number

of the direct printing port.

• The  “bidirect” setting indicates

whether the direct printing port
is bidirectional or not.

❖

❖

❖

❖ Setting timeout

You can specify the timeout inter-
val in use when receiving data
from the network.

❒ The default is 300 seconds.

❖

❖

❖

❖ Bidirectional configuration for the di-

Use this  setting to configure
whether the direct printing port is
bidirectional or not. The default is
“off”.

❒ If you select [on], SmartNet-

Monitor for Client or Standard
T C P / I P   o n   W i n d o w s   2 0 0 0
might not work correctly.

Use the " netware " command to con-
figure the NetWare settings such as
the print server name or file server
name.

pname

Enter the NetWare print serv-
er name using up to 47 char-
acters.

fname

Enter the NetWare file server 
name using up to 47 charac-
ters.

encap 
[802.3/802.2
/snap/ 
ethernet2/ 
auto]

Select the encap type.

rnum

Specify the remote printer 
number.

timeout

Set the timeout.

mode 
pserver

mode ps

Select the print server mode.

mode 
rprinter

mode rp

Select the remote printer 
mode.

context

Specify the NDS context 
name.

sap_interva
l

Specify the SAP intervals.
Each interval can be set to be-
tween 0 and 3600 seconds in 
one-second increments.

login server Specify “login with a selected 

file server” as the login mode.

login tree

Specify “login with a selected 
NDS tree” as the login mode.

tree NDS 
tree name

Select the NDS tree to log on 
to.