ONKYO BD-SP809 ユーザーガイド

 

D  Note for “IP Address”, “Subnet Mask”, 

•  The range of input numbers is between 0 and 255.
•  If you enter a number larger than 255, the number will 

automatically be 255.

•  When you enter a wrong number, select “Clear” to 

clear. (The number will be back to “0”.)

•  If you want to enter a 1 or 2-digit number in one cell, 

press [

Æ] to move on to the next cell.

 

D Note for “Proxy Address” and “Proxy Port”
•  The range of input numbers for the port number is 

between 0 and 65535. (If you enter a number larger 
than 65535, it will be regarded as 65535.)

•  For proxy port, certain ports might be closed, blocked 

or unusable depending on your network environment.

•  Choose a connection speed in accordance with your 

network environment.

•  When the settings are changed, the network 

connection may be disabled depending on the device.

You can view the ESN number which is a serial 
number used by Netflix to identify a device. Netflix 
customer service might ask you for this number during 
troubleshooting.
1.  Follow steps 1 to 2 in “Connection Test” on page 42.
2. Use [

Π/ ï] to select “Netflix ESN”, then press 

[ENTER].

3. Press [HOME  ] to exit.

] Ȼ “Settings” Ȼ “HDMI” Ȼ “HDMI CEC”

HDMI CEC allows integrated system control over HDMI 
and is part of the HDMI standard. This function may not 
work properly depending on the device connected to the 
unit. When “HDMI CEC” setting is set to “On”, functions 
listed below will be available.

HDMI CEC operations are performed using remote 
control buttons. The TV will automatically be turned on 
and switched to the appropriate input source signal.

 

B (play)], [

H

 (skip)], [

G

 (skip)], 

[the Number buttons], [HOME  ], or 
[DISPLAY]

 

– [TOP MENU] or [POP UP MENU / MENU] 

(when a disc is inserted in the unit)

When you press and hold [

. (on/standby)] for 2 

seconds, it will turn off the power to the TV first and then 
turn off the power to this unit.

When the connected HDMI CEC compatible display 
device is turned off first, this unit will be turned off 
subsequently.

The unit recognizes the OSD language set on the TV and 
automatically sets the same language as the player menu 
language (OSD menu language) for this unit. Refer to the 
“Player Menu” on page 40 for available languages.
•  This feature is available only when “Auto” is selected 

in the “Player Menu” section in the setup menu.

 

D Note
•  HDMI CEC function is only available for HDMI OUT MAIN 

jack.

E5WB0UD_EN_Book.indb   44

E5WB0UD_EN_Book.indb   44

2011/06/02   11:48:22

2011/06/02   11:48:22