ONKYO BD-SP809 ユーザーガイド
EN
46
D Note
• You can select “Source Direct” or “Auto” by pressing
• You can select “Source Direct” or “Auto” by pressing
[SOURCE DIRECT] on the front panel.
• You can also change the resolution of the video signal
being output from the HDMI OUT jack by pressing
[RESOLUTION] repeatedly.
[RESOLUTION] repeatedly.
• Pressing
[RESOLUTION] does not work when
HDMI cable is not connected, or when no video signal
is being output from the HDMI OUT jack.
is being output from the HDMI OUT jack.
• Pressing
[RESOLUTION] does not work during the
playback of a BD-video or AVCHD.
• The selected resolution must also be supported by
your display device.
• If your TV and the unit is connected by a DVI
cable and if you select “Auto” or “Source Direct”,
“480p” will be automatically in effect.
“480p” will be automatically in effect.
• Even if “Video Resolution” is set to “1080p/24”, for a
Blu-ray Disc™ that is not recorded in 1080p/24 or for
DVD, the video resolution supported by the disc and
the display device will be output instead of 1080p/24.
DVD, the video resolution supported by the disc and
the display device will be output instead of 1080p/24.
• Refer also to your TV’s manual.
• When the HDMI OUT jack is outputting the video in
• When the HDMI OUT jack is outputting the video in
1080p/24 or 3D, picture will not be output from the
VIDEO OUTPUT jacks.
VIDEO OUTPUT jacks.
• Do not remove HDMI cable during playing the video
in 1080p/24 or 3D. Video signals will not be output if
you replace the connection to a device which is not
compatible with 1080p/24 or 3D contents.
you replace the connection to a device which is not
compatible with 1080p/24 or 3D contents.
• When connected to an HDCP incompatible display
device, the picture will not be displayed properly.
• The audio signals from the HDMI OUT jack (including
the sampling frequency, the number of channels and
bit length) may be limited by the connected device.
bit length) may be limited by the connected device.
• Among the display device(s) that support HDMI,
some do not support audio output (for example,
projectors). While connected to a device such as a
projector, audio will not be output from the HDMI
OUT jack.
projectors). While connected to a device such as a
projector, audio will not be output from the HDMI
OUT jack.
• When this unit’s HDMI OUT jack is connected
to a DVI-D compatible display device(s) (HDCP
compatible) with an HDMI-DVI converter cable, the
signals are output in digital RGB.
compatible) with an HDMI-DVI converter cable, the
signals are output in digital RGB.
• When you make a selection, the TV monitor
temporarily goes blank and then comes back again.
If it does not come back, press [RESOLUTION]
repeatedly to change the resolution or touch and
hold [
If it does not come back, press [RESOLUTION]
repeatedly to change the resolution or touch and
hold [
B (play)] on the front panel for 5 seconds to
change the setting back to its default.
• When playing back a Frame Sequential 3D Disc, video
resolution of output picture will depend on contents
on the disc. (“Video Resolution” setting is not
applicable for Frame Sequential 3D Discs.)
on the disc. (“Video Resolution” setting is not
applicable for Frame Sequential 3D Discs.)
Copyright protection system
To play back the digital video images of a BD-video or
DVD-video via an HDMI connection, it is necessary that
both the player and the display device (or an AV receiver
/ amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system).
HDCP is copy protection technology that comprises data
encryption and authentication of the connected AV device.
This unit supports HDCP. Please read the operating
instructions of your display device (or an AV receiver /
amplifier) for more information.
DVD-video via an HDMI connection, it is necessary that
both the player and the display device (or an AV receiver
/ amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system).
HDCP is copy protection technology that comprises data
encryption and authentication of the connected AV device.
This unit supports HDCP. Please read the operating
instructions of your display device (or an AV receiver /
amplifier) for more information.
12.5
Parental
Rating’s control allows you to set a limit, which prevents
your children from viewing inappropriate materials. Playback
will be stopped if the rating’s exceed the level you set, and it
will require you to enter a password before playing back the
disc.
1. Use [the Number buttons] to enter your 4-digit
your children from viewing inappropriate materials. Playback
will be stopped if the rating’s exceed the level you set, and it
will require you to enter a password before playing back the
disc.
1. Use [the Number buttons] to enter your 4-digit
password.
For first time use:
Use [the Number buttons] to enter any 4-digit
number (except for 4737). That number will be used
as the recover password. Record your password, in
case you might forget it.
For first time use:
Use [the Number buttons] to enter any 4-digit
number (except for 4737). That number will be used
as the recover password. Record your password, in
case you might forget it.
• If you forget the password, enter [4], [7], [3],
[7]. The password will be cleared and rating level
will be set to “Off”.
will be set to “Off”.
• When you input the password, select “Clear” to
clear the number, then re-enter the password.
ɶ BD Rating Level
[HOME
] Ȼ “Settings” Ȼ “Playback” Ȼ “BD Rating Level”
1. Use
[
Î / ï / Í / Æ] to select “Settings” in the home menu,
then press [ENTER].
2. Use [
Î / ï] to select “Playback”, then press
[ENTER].
3. Use [
Î / ï] to select “BD Rating Level”, then press
[ENTER].
4. Use [the Number buttons] to enter your 4-digit
password.
5. Use [
Î / ï] to select your desired option, then press
[ENTER].
“Off”
: To release the limitation.
“Age Setting” : To set the age limitation.
• After selecting “Age Setting”, use
[the Number buttons] to enter the age.
(e.g., For age 6, enter [6] + [ENTER].
(e.g., For age 6, enter [6] + [ENTER].
For age 15, enter [1], [5] + [ENTER].)
6. Press [HOME ] to exit.
E5WB0UD_EN_Book.indb 46
E5WB0UD_EN_Book.indb 46
2011/06/02 11:48:23
2011/06/02 11:48:23