ONKYO ht-r500 取り扱いマニュアル

21

If the equipment is digitally connected to the AV Receiver, the
sound from the digital input will automatically be selected and
reproduced instead of the analog sound as explained below.

The initial settings are as follows:

• When the DVD source is selected, the digital sound from the

DIGITAL INPUT COAXIAL connector is reproduced.

• When the CD source is selected, the digital sound from the

DIGITAL INPUT OPTICAL 2 connector is reproduced.

• When the TAPE source is selected, the digital sound from the

DIGITAL INPUT OPTICAL 1 connector is reproduced.

When the digital sound is reproduced, the 

ŸDIGITAL, DTS, or

PCM (2 channel digital stereo) indicator lights up according to the
received sound system in the AV Receiver’s display.

This section shows you how to play the sources connected to the
AV Receiver.

You may need to see “Connecting to audio/video equipment” on
page 10 while following the steps in this section.

• DVD

• VIDEO 1

• VIDEO 2

• VIDEO 3

• TAPE

• CD

Volume level

When MD recorder is connected to the TAPE jacks, you can
switch the source from TAPE to MD (see page 23).

If no SPEAKERS indicator is lit, press SPEAKERS A/B on the
unit or SP A/SP B on the remote controller to select the speaker
system(s) to be used.

5/∞ on the remote controller or

To use the following functions, see pages 26 and 27.

• Turning on/off the SPEAKERS A/SPEAKERS B systems

• Muting the sound

• Listening through headphones

• Changing the display

• Controlling the brightness of the lghts on the AV Receiver

• Using the sleep timer

See page 30.

5/∞

ŸDIGITAL