ONKYO ht-r500 取り扱いマニュアル

22

When connecting digital source components to the DIGITAL
INPUT jacks on the rear panel, assign the input source button on
the front panel to either a DIGITAL INPUT OPTICAL or
COAXIAL jack depending on the type of connector on the digital
source components. The DVD, CD, VIDEO 1, VIDEO 2, VIDEO 3
and TAPE inputs can be assigned to the DIGITAL INPUT jacks.

With the initial setting, the OPTICAL 2 connector is assigned to the
CD input, COAXIAL is assigned to the DVD input and OPTICAL
1 is assigned to the TAPE input, and no input connector is assigned
to the VIDEO 1-3 inputs.

CD

OPTICAL 2

TUNER

TAPE

OPTICAL 1

VIDEO 3

– – – –

VIDEO 2

– – – –

VIDEO 1

– – – –

DVD

COAXIAL

– – – – : Available for digital input but not set in initial setting.

: Not available for digital input.

Select if the input source is not from a
digital input jack.

The DVD input is selected and “DVD” appears in the display.

Select if connected to DIGITAL INPUT
COAXIAL.

Select if connected to DIGITAL INPUT
OPTICAL 1.

Select if connected to DIGITAL INPUT
OPTICAL 2.

The current DVD setting (COAX) appears.

Pressing DIGITAL INPUT repeatedly will change the setting
as follows:

About three seconds after “DVD 

← OPT1” is selected, the

original display appears and the setting is completed.

If you have selected digital input, you can also select the input
signal format (refer to “Setting the input signal format” on page
28).