TallyGenicom 3860 クイック設定ガイド

ページ / 203
GEK-01054
14
     LPI
       5
Press once to display the current lines per inch setting.  Press
repeatedly to step through available LPI settings.  Wait three seconds
and the displayed selection becomes the current selection.  All
emulations support continuously adjustable line spacing.  If the host
transmitted an LPI setting that is not on the standard LPI list, for
example, 7 LPI, then the LCD shows LS (for “Line Select”) after the
number.  Functions as the “5” key in menu entry mode.
  FF / Load
       6
FF (Form Feed)/Load prints any data remaining in the input buffer and
advances paper according to the current form length.  When paper is
parked, FF/Load loads the form.  Functions as the “6” key in menu entry
mode.
      LF
       7
LF (Line Feed) prints any data remaining in the buffer and advances
paper one line according to the current lines-per-inch setting. Use the
line feed key carefully; if it is used to position a form in the printer, or to
view a line under the print head, this affects the registration of the
current, and possibly subsequent, pages. To see data under the print
head, use the TEAR OFF key. Functions as the “7” key in menu entry
mode.
        8
Press and release to advance paper 1/72 inch per click.  Hold it down
continuously to advance paper faster.  Functions as the “9” key in menu
entry mode.
        9
Press and release to retract paper 1/72 inch per click. Hold it down
continuously to advance paper faster.  Functions as the “9” key in menu
entry mode.
  Tear Off
       0
Advances a form to the Tear Off position to tear off or view.  Press
again to retract paper. Paper will automatically retract after 15 seconds
or, if data is received, the paper will be retracted and printing will begin.
Remove a partially printed form by pressing FF first, and then TEAR
OFF.  Functions as the “0” key in menu entry mode.
     Clear
     First
Press this key to clear a fault. Functions as the “First” key in the menu
mode.  In the menu mode press this key to return to the beginning of
the menu.
  On Line
  Former
The ON LINE key toggles between Offline and Online as long as there
is no printer fault and the printer is not in menu mode. When the printer
is online, it can print received data. When it is offline, printer settings
can be changed, and test patterns and status reports can be printed.
Functions as the “Former” key in the menu mode.