Boundless adds 4000 ユーザーガイド

KEYBOARD: F4     39

 

Key Rate:  [15 cps, 20 cps, 30 cps]   

When “Key Repeat” is on, a key that is pressed for more than half a second will 
automatically repeat.  This selection allows you to choose the number of characters 
that are generated per second when a key is auto repeating. 

Keyboard Layout:  [Q, F]   

This selection is only available when Turkish keyboard is selected.  Q and F refer to the 
two Turkish keyboard layouts available.  Q and F correspond to the top left key on the 
alphanumeric keypad. 

Margin Bell:  [On, Off]   

Choose whether a bell tone sounds when the cursor is nine positions away from the 
right margin. 

Key Lock:  [Caps, Reverse, Shift]   

Affects the state of alphanumeric keys when Caps-Lock is engaged.  

þ 

 causes alphabetic keys to be uppercase regardless of the Shift key.   

þ 

 causes the Shift key to generate lowercase alphabetic keys.   

þ 

 causes all alphanumeric keys to be generated as uppercase (or shifted, in the 

case of numbers).  If the Shift key is hit, while Shift is selected, Caps-Lock will be 
disengaged. 

Caps Lock:  [Toggle, Always On, Always Off]   

This setting effects the state of the Caps Lock key.  When set to always on or always off 
the key has no effect.  When set to toggle, the terminal will power on in the off mode 
and pressing the key will alternate between the off mode and the on mode.  

Num Lock:  [Toggle, Always On, Always Off]   

This setting effects the state of the Num Lock key.  When set to always on or always 
off the key has no effect.  When set to toggle, the terminal will power on in the off 
mode and pressing the key will alternate between the off mode and the on mode.

Code Page:  [CP 437, CP 850, CP 852, CP 857, CP 860, CP 861, CP 862, 

CP 863, CP 865, CP 866, CP 869, ISO-1, ISO-2, ISO-5, ISO-Hebrew, ISO-Cyrillic, 

ISO-Greek, DEC Multi]   

This selection is only available in 8-bit emulations in Multinational Mode.  The 
default code page is based upon language and emulation selected.  To determine which 
sets are loaded for each code page, refer to the