Infocus XS1 参照ガイド

ページ / 61
Maintenance
52
Timing of replacing the lamp
When the Lamp indicator lights up red or a message appears suggesting it is time 
to replace the lamp, please install a new lamp or consult your dealer. An old lamp 
may cause a malfunction in the projector and in some instances the lamp may 
explode.
CAUTION
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too 
hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator 
still lights up after turning the power back on, please contact your dealer. See 
 for details.
The following Lamp warning displays will remind you to change the lamp.
Status
Message
The lamp has been in operation for 3000 
hours. Install a new lamp for optimal 
performance. If the projector is normally run 
with "Economic Mode" selected (See 
), you may 
continue to operate the projector until the 
3950 hour lamp warning appears.
The lamp has been in operation for 3950 
hours. A new lamp should be fitted to avoid 
the inconvenience when the projector runs 
out of lamp time.
The lamp has been in operation for 4000 
hours. 
It is strongly recommended that you replace 
the lamp at this age. The lamp is a 
consumable item. The lamp brightness 
diminishes with use. This is normal lamp 
behavior. You can replace the lamp whenever 
you notice that the brightness level has 
significantly diminished. If the lamp is not 
replaced beforehand, it must be replaced 
after 3000 hours usage.
The lamp MUST be replaced before the 
projector will operate normally.
OK
Order Replacement Lamp
Lamp > 3000 Hours
Notice
OK
Replace Lamp Soon 
Lamp > 3950 Hours
Notice
OK
Replace Lamp Now 
Lamp > 4000 Hours
Lamp usage time exceeded
Notice
OK
Out of Lamp Usage Time
Replace lamp (refer to reference guide)
Then reset lamp timer
Notice