Infocus LP770 参照ガイド

Press this button to have the projector automatically re-adjust a 
computer image. It adjusts horizontal and vertical position, fine 
sync, and tracking.

When you have more than one source (computer 1 or 2 or video) 
connected to the projector, select between them by pressing the 
button for the source you want.

Press 

 to display your computer image. Press 

again to toggle between computer 1 and computer 2.

Use this button to accept your selections in the menus.

Press 

 to open the on-screen menus. Press 

 again to 

close the menus. When you close the menus, the projector saves 
any changes you made. For more information about the on-
screen menus, see page 20.

Pressing the 

 button silences the internal speakers and 

removes the projected image from the screen. To prevent damage 
to the projector, the projector automatically turns the audio and 
image back on after 10 minutes.

To restore the image and audio, press 

again.

The 

 button turns the projector on and off. When you press 

the power switch, the projector enters standby mode and the 
Power LED lights red. When you press the 

 button, the 

lamp lights and the Lamp and Power LEDs light green. 

When you press the 

 button again, the lamp goes out and 

the Power LED lights red. See page 12 for details on turning the 
projector on and off.

When you have more than one source (computer 1 or 2 or video) 
connected to the projector, select between them by pressing the 
button for the source you want.