Infocus LP770 参照ガイド

Press 

to display the image from your video player. Press 

again to toggle between video 1 and video 2.

To focus the image, press the 

 button on the remote or 

keypad. “Focus” appears on the screen. Press the adjacent “+” or 
“-” buttons until the image is clear. To zoom the image, press the 

 button again. “Zoom” appears on the screen. Press 

the adjacent “+” or “-” buttons to adjust the size of the image. 
This adjusts the size without affecting focus.

This feature allows you to resize images and digitally zoom in on 
a part of a computer image. Press the Expand button. The image 
is expanded, if possible. Press the Expand button again, then 
press the + or - buttons to change the magnification of the area. 
You can use the arrow buttons to move to a specific area. Press 
the Expand button again to return to the normal view.

The laser button activates a laser beam that can be used as a 
pointing device. To use the laser, press and hold the laser button. 
The laser goes off when the button is released.

Picture in Picture (PinP) allows you to view 2 different sources at 
the same time. The computer source is the main image, the video 
source is the sub-image. Press the PinP button. The sub-image 
appears. You can move the image using the arrow buttons or 
change its size using the + or - button. Use the 

 button to 

change the video source displayed in the sub-image.

The 

 button halts, or “freezes” the projected image. Use this 

button to freeze a frame of video (the video continues to run but 
the projected image is frozen). You can also freeze an image from 
a computer source on the screen, allowing you to perform other 
operations on the computer without the audience seeing them. 
Press 

again when you want the image to return to normal.