ICOM ic-207h 取り扱いマニュアル

10

44

■ Priority watch types

Priority watch checks for signals on a memory or call chan-
nel every 5 sec. while operating on a VFO frequency. The
transceiver has 3 priority watch types to suit your needs. You
can transmit on the VFO frequency while the priority watch
operates.

The watch resumes according to the selected scan resume
condition. See previous page for details.

NOTE:
• Priority watch cannot be started from a scratch pad

memory.

• The DTMF memory encoder is turned OFF when priority

watch starts.

• If the pocket beep function is activated, the transceiver

automatically selects the tone squelch function when pri-
ority watch starts.

• When “SCt-EP” is selected for the scan resume condi-

tion, the priority watch pauses on a no-signal channel.
(p. 43)

VFO

frequency

Memory

channel

5 sec.

125 msec.

VFO

frequency

Mch 1

Mch 0

Mch 2

Mch 150

5 sec.

125 msec.

VFO

frequency

Call

channel

5 sec.

125 msec.

While operating on a VFO
frequency, priority watch
checks for a signal on the
selected memory channel
every 5 sec.

• A memory channel with skip

information can be watched.

While operating on a VFO
frequency, priority watch
checks for signals on each
memory channel in se-
quence.

• The memory skip function and

memory area setting are use-
ful to speed up the scan.

While operating on a VFO
frequency, priority watch
checks for a signal on the
call channel every 5 sec.