ICOM id-800h 取り扱いマニュアル
30
5
MEMORY OPERATION
5
D
Programming a memory channel via the microphone
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.
Push 10 times
Beep
“
Beep
“
Beep
Beep
Beep
“
“
“
“
“
Push
Push then
Push then for 1 sec. and continue to push
➠
The microphone can also be used to program mem-
ory channels.
z Set the desired frequency in VFO mode.
➥ Push
[VFO/LOCK]
to select VFO mode.
➥ Set the frequency using the keypad.
➥ Set other data
(e.g. offset frequency, duplex direction, sub-
audible tone encoder ON/OFF and its frequency)
, if neces-
sary.
x Push
[FUNC]
then
[
CLR
A(MW)]
momentarily.
c Push
[
Y
Y
]
or
[
Z
Z
]
to select the memory channel.
•
Direct numeral input cannot be used
.
v Push
[FUNC]
, and then push and hold
[
CLR
A(MW)]
for
1 sec. to program.
➥ 3 beeps may sound and the VFO contents (including
➥ 3 beeps may sound and the VFO contents (including
the subaudible tone frequency, etc.) are programmed.
➥ Memory channel number increases when continuing to
push
[
CLR
A(MW)]
after programming.
MW