ICOM id-800h 取り扱いマニュアル

32

5

MEMORY OPERATION

D

➪

q Select the memory/call channel to be transferred.

➥ Push 

several times to select memory

mode or call channel, then rotate 

or push

to select the desired memory or call

channel respectively.

w Push 

momentarily.

• “!” indicator and “-- -- --” indication blink, and shows VFO con-

ditions.

e Rotate 

to select the target memory channel.

• “C1” or “C2” blinks when the call channel is selected.
• Scan edge channels, 1A/1B, 2A/2B, 3A/3B, 4A/4B, 5A/5B can

also be selected.

r Push and hold 

for 1 sec. to transfer the se-

lected memory/call channel contents to the target memory.

• The targeted memory and transferred contents are indicated.

z Select the memory/call channel to be trans-

ferred.

➥ Push 

to select memory mode,

then select the desired memory channel
via 

Y

Y

/

Z

Z

or keypad.

➥ Push and hold 

for 1 sec. then

push 

to select the desired call

channel.

x Push 

, then 

momentarily.

• “!” indicator and “-- -- --” indication blink, and

shows VFO conditions.

c Push 

Y

Y

/

Z

Z

to select the target memory

channel.

• “C1” or “C2” blinks when the call channel is selected.
• Scan edge channels can also be selected.
• The keypad cannot be used for the selection.

v Push 

then push 

for

1 sec. to transfer the selected memory/call
channel contents to the target channel.

• The targeted channel and transferred contents

are indicated.

MR/CALL

MW

BAND

[

Y

]/[

Z

]

Transferring memory channel 30 contents to channel 31.

Select the target channel.

Push                     for 1 sec.

Push          then push          for 1 sec.

Select the memory channel, then push                    .

Select the memory channel, push          then push         .