ICOM id-800h 取り扱いマニュアル
■
Priority watch types
Priority watch checks for signals on a VFO frequency every
5 sec. while operating in memory mode. The transceiver has
3 priority watch types to suit your needs. You can also trans-
mit on the VFO frequency while priority watch operates.
5 sec. while operating in memory mode. The transceiver has
3 priority watch types to suit your needs. You can also trans-
mit on the VFO frequency while priority watch operates.
The watch resumes according to the selected scan resume
condition. See previous page for details.
condition. See previous page for details.
NOTES:
If the pocket beep function is activated, the transceiver au-
tomatically selects the tone squelch function when priority
watch starts.
tomatically selects the tone squelch function when priority
watch starts.
MEMORY CHANNEL WATCH
While operating on a VFO fre-
quency, priority watch checks for
a signal on the selected memory
channel every 5 sec.
quency, priority watch checks for
a signal on the selected memory
channel every 5 sec.
MEMORY SCAN WATCH
While operating on a VFO fre-
quency, priority watch checks for
signals on each memory chan-
nel in sequence.
quency, priority watch checks for
signals on each memory chan-
nel in sequence.
• The memory skip function is useful
to speed up the scan.
CALL CHANNEL WATCH
While operating on a VFO fre-
quency, priority watch checks for
signals on the call channel every
5 sec.
quency, priority watch checks for
signals on the call channel every
5 sec.
5 sec.
VFO
frequency
50 msec.
Memory
channel
5 sec.
50 msec.
VFO
frequency
SKIP
Mch 1
Mch 2
Mch 3
Mch 500
5 sec.
VFO
frequency
50 msec.
Call
channel
49
PRIORITY WATCH
8