ICOM id-800h 取り扱いマニュアル
50
8
PRIORITY WATCH
8
■
Priority watch operation
q Select VFO mode; then, set an operating frequency.
w Set the watching channel(s).
w Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push
[V/MHz•SCAN]
for
1 sec. to start memory scan.
For call channel watch:
Select the desired call channel by pushing
[M/CALL•PRIO]
once or twice, then push
[BAND•MODE]
.
e Push
[M/CALL•PRIO]
for 1 sec. to start the watch.
• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-
• The watch resumes according to the selected scan resume con-
dition. (p. 48)
• While the watch is pausing, pushing
[M/CALL•PRIO]
resumes
the watch manually.
r Push
[M/CALL•PRIO]
for 1 sec. to stop the watch.
z Select VFO mode; then, set the desired fre-
quency.
x Set the watching channel(s).
For memory channel watch:
Push
[MR/CALL]
then
[
Y
Y
]
or
[
Z
Z
]
to select the
desired memory channel.
For memory scan watch:
Push
[MR/CALL]
, then push
[
SCAN
2(T-SCAN)]
to start the memory scan.
For call channel watch:
Push
[MR/CALL]
for 1 sec. then push
[BAND]
to
select the call channel.
c Push
[
PRIO
3(PTT-M)]
to start the watch.
• The transceiver checks the memory or call channel
every 5 sec.
• The watch resumes according to the selected scan re-
sume condition. (p. 48)
• To resume the watch manually when paused, push
[
PRIO
3(PTT-M)]
or
[
CLR
A(MW)]
.
v To stop the watch, push
[
CLR
A(MW)]
once (or
twice while watch is paused).
PRIO
3
[M/CALL•PRIO]
“PRIO” appears