ICOM rs-rp2c ソフトウェアガイド
5
2
SYSTEM SETUP
D
D Named setting
IMPORTANT!: Master the basis of BIND with a ref-
erence book of Linux, before starting the named
setting.
erence book of Linux, before starting the named
setting.
q Add local zone setting file (dstar.local.) to
“/etc/named.conf.”
• e.g.; /etc/named.conf
w Create database, /var/named/dstar.local.db, for
local D-STAR as the following example.
NOTE: A full-stop period must be applied into
2nd, 3rd and 10th lines. And set the separator
as below at the end of the line.
2nd, 3rd and 10th lines. And set the separator
as below at the end of the line.
;##DSTAR A RECORD
• e.g.; /var/named/dstar.local.db
✔ For your information
When “Fedora Core 2” is used, the database location
is “/var/named/chroot/var/named/dstar.local.db.”
When “Fedora Core 2” is used, the database location
is “/var/named/chroot/var/named/dstar.local.db.”
e Open “Service Configuration” screen with the fol-
lowing mouse operation.
r Click the check box beside “named,” then save the
changed setting if no check mark, “
✔,” is added.
t Select “named” item, then click [Restart] to restart
the named setting.
z Select
x Click
z Click to add check mark, “
✔.”
x Click
c Click to save
z Click
v Click
c Select
x Select
Full stop period
Full stop period
Separator
Full stop period
Add