ICOM rs-rp2c ソフトウェアガイド
6
2
SYSTEM SETUP
D
D DNS function verification
q Start up “Terminal” with the following mouse oper-
ation.
w The local DNS operation can be verified by enter-
ing the following command.
# dig router.dstar.local
# dig router.dstar.local
e When the correct router IP address “10.0.0.1” is
displayed in the answer section as below, the GW
setup is succeeded.
setup is succeeded.
Router IP address
Enter the command
z Click
c Click
x Select
For your convenience:
Set the syslog if desired.
By setting the syslog, easy log management is pro-
vided because of the independent log.
By setting the syslog, easy log management is pro-
vided because of the independent log.
➥Add the following contents in “etc/syslog.conf.”
# for D-STAR
local0.*
/var/log/dsgwd.log
local2.*
/var/log/dsipsvd.log
D
D Syslog setting
■ Gateway control software
D
D Installation
q Insert the RS-RP2C CD into the drive.
w Expands the file into the “/dstar” directory using
w Expands the file into the “/dstar” directory using
with the following command, or double-click the file
during the CD content is displayed.
Command: # tar zxvf dstar-xxxx.tar.gz
during the CD content is displayed.
Command: # tar zxvf dstar-xxxx.tar.gz
(XXXX=revision number)
e Copy the both “dsgwd.conf” and “dsipsvd.conf”
files, expanded in the “/dstar/conf” directory, into
the “/etc” directory.
the “/etc” directory.
r Open the copied files, then edit the contents to
suits the network.
• See page 8 and 9 for details.
D
D Starting up the control software
Execute script “/dstar/exec-mgsv” when starting up
the gateway control software.
the gateway control software.
When starting up the control software and the system
at the same time, add the command as above in the
“/etc/rc.d/rc.local.”
at the same time, add the command as above in the
“/etc/rc.d/rc.local.”
And we recommend to set the server condition as de-
scribed at right above to improve the gateway server
performance.
scribed at right above to improve the gateway server
performance.
• Deactivate all the services except below
anacron, apmd, atd, crond, keytable, named,
network, ntpd, random, sshd, syslog, xinetd
network, ntpd, random, sshd, syslog, xinetd
• Do not start up the X-Window System when
starting up the gateway server
Change the “Default runlevel” in “/etc/inittab” from
5 to 3.
5 to 3.
*The X-Window System start up manually with the
“startx” command.