Epson 500 クイック参照カード

Replacing Ink Cartridges

4. Shake the cartridge several times, 

then remove it from the package. 
Do not to touch the green chip on 
the side.

5. Remove the yellow tape from the 

bottom of the ink cartridge. 

Caution: 
Do not remove any other labels or seals, or ink will leak.

6. Insert the new ink cartridge into the holder and push it down until it clicks 

into place.

7. Once you replace all the cartridges that need replacing, close the cartridge 

cover and push it down until it clicks into place.

8. Close the scanner.

9. Press 

OK

 to begin charging the ink. This takes about 2 minutes. When you 

see a completion message on the display screen, ink charging is finished.

Caution: 
To conserve ink, never turn off the WorkForce 500 Series while ink is charging. If you 
see an ink replacement message on the display screen, press 

OK

 and press down all 

the cartridges securely.

If you remove a low or expended ink cartridge, you cannot reinstall and use the 
cartridge.