Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP ユーザーズマニュアル

製品コード

SRX-MP-1SFP

Using the CLI

To perform basic configuration for the 16-Port Gigabit Ethernet XPIM and to configure
network interfaces for the services gateway with the CLI:

•

Verify that the 16-Port Gigabit Ethernet XPIM is installed on the services gateway:

show chassis hardware

•

Verify the FPC status of the interface:

show chassis fpc

•

Assign the port an IP address:

set interfaces ge-1/0/0 unit 0 family inet address interface address/destination prefix

•

Assign MTU values:

set interfaces ge-1/0/0 unit 0 family inet mtu mtu values

•

Set link options:

set interfaces ge-1/0/0 gigether-options auto-negotiation

•

Add or select a security zone; for example, Trust:

set security zones security-zone trust interfaces ge-1/0/0.0 host-inbound-traffic

system-services all

•

Add or select security zones for host inbound traffic:

set security zones security-zone trust interfaces ge-1/0/0.0 host-inbound-traffic protocols

all

•

Set security policies:

set security policies default-policy permit-all

Documentation

•

•

•

•

•

•

137

Chapter 14: 16-Port Gigabit Ethernet XPIM