Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP ユーザーズマニュアル
製品コード
SRX-MP-1SFP
CHAPTER 15
24-Port Gigabit Ethernet XPIM
This chapter includes the following topics:
•
•
•
•
•
•
24-Port Gigabit Ethernet XPIM Overview
The 24-Port Gigabit Ethernet XPIM is a double-high, double-wide LAN switch
Gigabit-Backplane Physical Interface Module (GPIM) that uses two standard slots
vertically and two standard slots horizontally. It is available with or without Power over
Ethernet (PoE) support. The PoE GPIMs provide ports that supply electric power over
the same ports that are used to connect network devices. For more information about
PoE, see
Gigabit-Backplane Physical Interface Module (GPIM) that uses two standard slots
vertically and two standard slots horizontally. It is available with or without Power over
Ethernet (PoE) support. The PoE GPIMs provide ports that supply electric power over
the same ports that are used to connect network devices. For more information about
PoE, see
.
The 24-Port XPIM must be installed in specific GPIM slot groupings as shown in
Table 56: Slot Groups for the 24-Port Gigabit Ethernet XPIM
Slot Groups for the 24-Port Gigabit Ethernet XPIM
Device
Top four standard slots (slots 5, 6, 7, and 8)
SRX550
Bottom four standard slots (slots 1, 2, 3, and 4) and top four standard slots
(slots 5, 6, 7, and 8)
(slots 5, 6, 7, and 8)
SRX650
The center GPIM slot bracket must be removed before installing a double-high,
double-wide GPIM. See
double-wide GPIM. See
for details.
139
Copyright © 2012, Juniper Networks, Inc.