LG LD-1481W4 オーナーマニュアル

ページ / 44
• A qualified electrician/plumber or competent person should carry out any electrical/
plumbing work required to install this appliance.
WARNING
1.  This appliance must be supplied with the 
correct and same voltage shown on 
instruction manual, and connected to an 
individual, properly earthed branch circuit, 
protected by a minimum 15 amp circuit 
breaker or time delay fuse. 
Wiring must be 2 wires with Earth.
2.    The power plug must be in a accessible 
location adjacent to and not behind the 
dishwasher and within 1.2 meters of the 
dishwasher side.(See page 9 Fig.A)
3.    The power plug must be correctly earthed, if 
in doubt, have it checked by a qualified 
Electrician. No other appliance should be 
connected to the same plug outlet by a 
double adapter or similar plug.
Dangerous voltage
To indicate hazards arising 
from dangerous voltages.
Note- in case of an application 
warning sign, the rules 
according to ISO 3864 should 
be adhered to.
1.  This dishwasher is designed to fit the size 
shown as below.
2.   Select a location as close to the sink as 
possible for ease of connection to the water 
and drain pipes.
3.   To ensure good drainage, the dishwasher 
should not be installed more than 1 meter 
away from the sink.
4.  If the dishwasher is installed in a corner, a 
minimum of 5cm of space is required 
between the washer and an adjacent cabinet 
or wall.
7
Unit:mm
INSTALLATION INSTRUCTIONS
• For personal safety, remove house 
fuse or open circuit breaker before 
installation. 
• it is strongly recommended not use 
an extension cord or adapter plug 
with this appliance.  
Electrical and earthing connections must 
comply with the national electrical code/
provincial and municipal code and/or 
other local codes and standards.
CAUTION
• Any bare wood surrounding the 
dishwasher should be sealed with a 
waterproof paint or sealant to prevent it 
from swelling.
CAUTION
 Prepare the installation opening
  Preparation for electrical wiring