Sony ICS-SP20 ユーザーズマニュアル
ICS-SP20 User Manual
9
7.5 Audio
Settings
Volume
-- Selects the current (default) volume level
Spatial Effect
-- Specifies the strength of 3D-spatial effect
7.6 Tuner
Settings
Default Chan
-- Specifies the default channel, which will be selected upon ICS-SP20 power-up.
If this default channel is set to “0” -- the default channel will be the last channel
selected before the ICS-SP20 was powered off.
selected before the ICS-SP20 was powered off.
Rename Current Channel
-- Change the text label assigned to the current channel. This label is shown (if
enabled) on screen, along with the channel number, when the ICS-SP20 is
switched to this channel. Display of labels and channel numbers can be globally
disabled on enabled, see the subsequent menu options.
switched to this channel. Display of labels and channel numbers can be globally
disabled on enabled, see the subsequent menu options.
Show Label
-- Setting to enable will show up to an 8 character label specific to the channel
when changing channels.
Show Number -- Setting to enable will show up the channel number when changing channels.
Mode
Mode
-- Select tuner mode (channels allocation) to use, among broadcast and several
cable options.
Tune Channels -- Scans the channels, looking for valid signal presence, and “remembers” which
channels are valid and which are not. This “validity mask” is used then for
channel browsing using channel +/- buttons (so that a user browses through the
defined channels only). Note that before this operation ICS-SP20 must be
connected to RF-antenna or cable TV.
channel browsing using channel +/- buttons (so that a user browses through the
defined channels only). Note that before this operation ICS-SP20 must be
connected to RF-antenna or cable TV.