D-Link DAS-3224 ユーザーズマニュアル
D-Link DAS-3248 IP DSLAM
96
this interface.
Total Rx Cells count
The total number of valid ATM cells received by this
interface.
interface.
CLPI 0 Rx Cells
The number of valid ATM cells received by this in-
terface with CLP=0.
terface with CLP=0.
Rx Pkts Rejected count The total number of valid ATM cells discarded by
the interface.
Caution None
References •
Other atm vc related commands
• oam lpbk command
• atm port related commands
5.5.6 Ethernet Commands
create ethernet intf
Description: Use this command to create a physical Ethernet
interface.
Command Syntax: create ethernet intf ifname interface-name [ip
ip-address][mask net-mask][usedhcp true|false]
[speed{auto|100BT|1000BT}] [type
uplink|downlink][enable | disable][pkttype
Mcast|Bcast|UnknownUcast|All|None]
[orldecvalue][duplex half| full|auto][mgmtvlanid
mgmtvlanid] [priority priority]
[speed{auto|100BT|1000BT}] [type
uplink|downlink][enable | disable][pkttype
Mcast|Bcast|UnknownUcast|All|None]
[orldecvalue][duplex half| full|auto][mgmtvlanid
mgmtvlanid] [priority priority]
delete ethernet intf
Description: Use this command to delete a physical Ethernet
interface.
Command Syntax: delete ethernet intf ifname interface-name
get ethernet intf
Description: Use this command to get information about a particular
physical Ethernet interface, or about all the interfaces.
Command Syntax: get ethernet intf [ifname interface-name]
Modify ethernet intf
Description: Use this command to modify physical Ethernet interface
configuration.
Command Syntax: modify ethernet intf ifname interface-name [enable |
disable][pkttype
Mcast|Bcast|UnknownUcast|All|None] [ip
ip-address][mask net-mask][usedhcp
true|false][speed{auto|100BT|1000BT}] [orl decvalue]
[duplex half|full|auto] [mgmtvlanid mgmtvlanid]
[priority priority]
Mcast|Bcast|UnknownUcast|All|None] [ip
ip-address][mask net-mask][usedhcp
true|false][speed{auto|100BT|1000BT}] [orl decvalue]
[duplex half|full|auto] [mgmtvlanid mgmtvlanid]
[priority priority]