D-Link DSL-2640U (ANNEX B) ユーザーズマニュアル
DSL-2640U ADSL Annex B/Ethernet Router with Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
The contact information
for the administrator
Additional information on the contact of the router's administrator.
IP address
The IP address of the host on which the SNMP manager is located.
When you have specified the needed settings, click the Change button.
To disable the SNMP agent, deselect the Enable/Disable SNMP checkbox.
UPnP
On the Advanced / UPnP page, you can enable the UPnP function.
UPnP is a set of networking protocols designed for automatic configuration of network devices. The
UPnP function performs automatic configuration of the device's parameters for network
applications requiring an incoming connection to the router.
UPnP function performs automatic configuration of the device's parameters for network
applications requiring an incoming connection to the router.
Figure 49. The Advanced / UPnP page.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled checkbox and click the Change button.
Enabled checkbox and click the Change button.
If you want to enable the UPnP function in the router, select the Enabled checkbox and click the
Change button.
Change button.
Page 67 of 104