D-Link DSL-2640U (ANNEX B) ユーザーズマニュアル
DSL-2640U ADSL Annex B/Ethernet Router with Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
Interface Grouping
On the Advanced / Interface grouping page, you can assign virtual PVC connections to the
router's ports (create groups of interfaces), which allows distinguishing different types of traffic.
This function is mostly used in Triple-play networks. Also on the page you can configure the router
to connect to a private Ethernet line.
router's ports (create groups of interfaces), which allows distinguishing different types of traffic.
This function is mostly used in Triple-play networks. Also on the page you can configure the router
to connect to a private Ethernet line.
!
The Ethernet WAN function allows using any Ethernet port of the router to access the
Internet via Ethernet technology. When the function is enabled, the router is still able to
access the Internet via ADSL technology.
Internet via Ethernet technology. When the function is enabled, the router is still able to
access the Internet via ADSL technology.
Figure 50. The Advanced / Interface grouping page.
To enable the Ethernet WAN function, follow the steps below.
1. Select the choice corresponding to the LAN port that will be used as the WAN port of the
Ethernet WAN port radio button.
2. If you need to connect one or more VLANs to the created Ethernet WAN interface, select
the VLAN MUX Mode choice of the Ethernet WAN type radio button.
3. Click the Save button.
To create a new rule for interface grouping (a group of ports), click the Add group button (the
button is not displayed if there is no WAN connection in the system).
button is not displayed if there is no WAN connection in the system).
Page 68 of 104