Nikon SB-N10 ユーザーズマニュアル
26
En
Manual Flash Control
Manual Flash Control
Users of the AW1, J4, and S2 can rotate the fl ash unit mode dial
to M2 for manual fl ash control, allowing fl ash output to be se-
lected directly using the fl ash-level dial.
to M2 for manual fl ash control, allowing fl ash output to be se-
lected directly using the fl ash-level dial.
1
Adjust camera settings.
Adjust camera settings as follows.
• Shooting mode: Choose P, S, A, or M,
Adjust camera settings as follows.
• Shooting mode: Choose P, S, A, or M,
or choose
w
mode and select
Underwater (AW1 only).
• Flash control: Select Manual for
Flash control in the shooting menu.
We recommend setting fl ash output
to the minimum level to reduce the
drain on the camera batteries.
We recommend setting fl ash output
to the minimum level to reduce the
drain on the camera batteries.
• Underwater fl ash: Select Enable for
Underwater fl ash in the shooting
menu (users of the AW1 should note
that this option is only available from
camera fi rmware version 1.10).
menu (users of the AW1 should note
that this option is only available from
camera fi rmware version 1.10).
• Flash mode: Choose a setting that disables red-eye reduc-
tion and ensures that the fl ash will fi re with every shot.