Canon REALiS WUX10 Mark II D ユーザーズマニュアル

28

KEYSTONE button
Corrects keystone distortion. (

)

[ ] [ ]: For keystone adjustment.
Press D.SHIFT/KEYSTONE and then AUTO 
SET to adjust the keystone automatically.

• Moves the image up, down, left, and right 

when [16:9 D. image shift] or [4:3 D. image 
shift] is selected. (

, 

• [ ], [ ], [<], [>]:Moves an image to the de-

sired position.

<

<

<

<

MENU button (

)

Displays a menu on 
the screen.

AUTO SET button (

Performs input signal set-
tings, auto adjustment on fo-
cusing, keystone distortion, 
screen color correction, and 
so on.

FOCUS button (

Adjusts focusing.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
Press FOCUS and then AUTO SET 
to adjust the focusing automatically.

<

<

ZOOM button (

Adjusts the image size.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.

<

<

OK button (

)

Determines the item selected 
from the menu.

INPUT button (

)

Switches among input signals.

WARNING lamp (

)

Flashes red when a problem has 
been detected on the projector.

POWER button/lamp (

Turns the projector on or off.
Green: The projector is on.
Flashing green: The projector is being turned on.
Red: The projector can be turned on.
Flashing red: The projector is being turned off 
(the lamp is being cooled).

Pointer/VOL button (

)

Adjusts the sound volume.
[<]: Decreases the volume.
[>]: Increases the volume.
Selects the upper, lower, left 
or right item in the menu.

AUTO PC button (

)

Adjusts tracking and so on automatically in 
accordance with signal from a computer 
when ANALOG PC-1 or ANALOG PC-2 is 
selected.

LED illumination lamp (

Indicates the projector status with LEDs.
Blinking from the left: The projector is 
being turned on.
Blinking from the right: The projector is 
being turned off.
Middle LED flashing slowly: The image is 
being blanked out.
Left and right LEDs flashing slowly: The 
image is freezing.