Canon REALiS WUX10 Mark II D ユーザーズマニュアル

97

Setting Up Functions fr

om 
Menu

s

Prohibiting the Projector Operation

[Key lock]

You can prohibit the operation of the projector 
from either the top control or remote control.

Press the OK button to accept your setting 
and then press the MENU button.
• [Off] is the factory default.

Setting up the Remote Control Channel 

[Remote control]

You can set different channels to different 
remote controls, if you use two projectors 
at the same time.

Press the OK button to accept your setting 
and then press the MENU button.

• The factory defaults is [Ch1] for both 

projector and remote control.

• After changing the channel on the 

menu, be sure to change the channel of 
the remote control, too.

Selecting a Channel on the Remote Control
You can change the channel on the 
remote control as follows:

HDMI

COMPONENT

DIGITAL PC

VIDEO

ANALOG PC

Off

Disables the key lock.

Main unit

Prohibit the operation from the 
main unit.
Use the remote control.

Remote 
control

Prohibit the operation from the 
remote control.
Use the main unit.

The key lock function becomes effective 
from the moment the OK button is 
pressed after selecting [Main unit] or 
[Remote control]. Be sure to press the 
OK button on the top control or remote 
control which is not locked.

Key lock

System settings

To Unlock Key Lock Function
Turn off the projector and unplug the power 
plug. Hold down the OK button on the top 
control and connect the power plug. Make 
sure to keep holding down the OK button 
until a beep sounds. The key lock is 
unlocked.

HDMI

COMPONENT

DIGITAL PC

VIDEO

ANALOG PC

Ch1

Select the channel of the remote control 
used for this projector, and press the OK 
button.

Ch2

Ch1

Press the OK button and [ ] for 3 sec-
onds at the same time.

Ch2

Press the OK button and [>] for 3 sec-
onds at the same time.

Remote control

System settings

<