Canon REALiS WUX10 Mark II D ユーザーズマニュアル
95
Setting Up Functions fr
om
Menu
Menu
s
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an items you want to
enable in the auto setup function.
enable in the auto setup function.
Select [On] for the items if you want to
enable in auto setup function.
enable in auto setup function.
Press the OK button to accept your setting
and then press the MENU button.
and then press the MENU button.
• The factory default settings are as fol-
lows:
[Auto focus]:
[Auto focus]:
[On]
[Auto keystone]:
[On]
[Auto input]:
[On]
[Auto screen color]: [Off]
• You cannot change any items in [Auto
setup] if [16:9 D. image shift] or [4:3 D.
image shift] is selected for [Screen
aspect]. In addition, you cannot perform
the auto setup function. For the details
of the [Auto setup], refer to the page
image shift] is selected for [Screen
aspect]. In addition, you cannot perform
the auto setup function. For the details
of the [Auto setup], refer to the page
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector auto-
matically for saving power.
matically for saving power.
Press the OK button to accept your setting
and then press the MENU button.
and then press the MENU button.
• [Off] is the factory default.
• The POWER indicator flashes red and
• The POWER indicator flashes red and
green when the projector is in the
[Standby] power management mode.
[Standby] power management mode.
• You cannot enable the [Direct power on]
function (see the next item), if you select
[Off].
[Off].
HDMI
COMPONENT
DIGITAL PC
VIDEO
ANALOG PC
Auto focus
Enables the auto focusing.
Auto keystone Enables the auto keystone cor-
rection.
Auto input
Enables the auto input selec-
tion.
tion.
Auto screen
color
color
Adjusts color quality of images
corresponding to the color of
the projection screen.
corresponding to the color of
the projection screen.
Auto setup
System settings
HDMI
COMPONENT
DIGITAL PC
VIDEO
ANALOG PC
Off
Disables the power management
mode.
mode.
Standby If no input signal is received for 30
seconds, the projector enters the
standby mode, turning off the lamp
five minutes after start of countdown.
If it receives the input signal or is oper-
ated during such period of 30 sec-
onds, it resumes projection.
standby mode, turning off the lamp
five minutes after start of countdown.
If it receives the input signal or is oper-
ated during such period of 30 sec-
onds, it resumes projection.
Exit
If no input signal is received for 30
seconds, it displays the count down
and turns off the projector after 5 min-
utes.
seconds, it displays the count down
and turns off the projector after 5 min-
utes.
Power management mode
System settings