Epson Система команд EPSON ESC/P2 (Часть 2. Рекомендованные операции) 機能

R-3

This section describes the recommended method and order of performing

operations on an EPSON dot matrix printer. An outline of recommended

operation order is provided first, followed by detailed explanations of each

operation.

Basic recommendations are provided for printers featuring ESC/P 2. You should

follow these recommendations if you are writing programs for ESC/P 2 printers.

In addition, this section provides information on newly added ESC/P 2

commands, known as extended ESC/P 2, as well as programming examples for

EPSON’s high-resolution (up to 720 by 720 dpi) color printer models.

Where necessary, additional explanations are included for 24/48-pin printers at

previous ESC/P levels, as well as for 9-pin printers. Although ESC/P 2 printers

can operate using software written for earlier printers (if deleted and

nonrecommended commands are avoided), you should use the ESC/P 2 level

explanations to take full advantage of advanced ESC/P 2 features.