Canon imagePROGRAF iPF8400SE マニュアル

Mac OS Settings

Mac OS Settings

If you use the printer in a TCP/IP network, register the printer in Print & Scan (or Print & Fax) in the Mac OS System
Preferences.

Note

For details on how to register a printer using a TCP/IP network, see the OS User Manual.

Important

If you use the printer in a TCP/IP network, make sure the printer's IP address is configured correctly. 

If you use the printer in a network that uses the Bonjour function, register the printer in Print & Scan (or Print & Fax) in
the Mac OS System Preferences.

Note

For details on how to register a printer using Bonjour, see the OS User Manual.

Important

Bonjour and IP Print (Auto) do not support printing to a printer on other network groups that require a router for con-
nection. Make sure the computer and printer are on the same network. For information about network settings, ask
your network administrator.

By default, Bonjour is activated on the printer. You can activate or deactivate the Bonjour function or change the print-
er name by using RemoteUI. For instructions on changing it, 

To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination as follows.

Activating AppleTalk on the printer

Important

By default, the AppleTalk protocol is disabled on the printer.

 

On the Tab Selection screen of the Control Panel, press 

◀ or ▶ to se-

lect the Settings/Adj. tab (

).

Note

If the Tab Selection screen is not displayed, press the Menu button.

 

iPF8400SE

                                                                                                                                                       

Configuring the Destination in TCP/IP Networks

                                                                                                                                                                                                                             

Network Setting

Mac OS Settings

527