Canon imageFORMULA P-208II Scan-tini Personal Document Scanner マニュアル

Connect the scanner to the computer and power outlet.

Connect the scanner to the computer.

Turn OFF the Auto Start switch on the rear of the scanner, and use the 
supplied USB cable to connect the scanner to the computer.

• Take care not to disconnect the USB cable while data is being 

transferred between the scanner and computer during scanning.

• The USB connector to which the scanner is connected on your computer 

must be one capable of supplying 500 mA / 5 V of power.

• Do not connect the scanner to the computer before installing the 

software.

The scanner cannot be used when it is connected to a computer via a bus-
powered USB hub. A self-powered USB hub can be used, but operation is 
not guaranteed.