Canon Océ VarioPrint 6000+ Series マニュアル
Operator Manual
Page 39
List of default parameters in the automatic menu:
To reset the gluing and cover clamp parameters to their "AUTO" values, press the
icon in the automatic menu.
• Binding parameters: - Carriage speed: fast.
- Milling activated.
- Milling depth: 1 mm - 3/64".
- Temperature at which glue is applied (working temperature of the glue).
- Both gluing cylinders activated + lateral gluing (if option installed).
- Glue cut-off on front: 5 mm - 13/64".
- Glue cut-off on back: 5 mm - 13/64".
- Thickness of glue film: adapted to the thickness of the book.
• Cover clamp parameters: - Cover mode activated.
- N to 1 mode activated.
- 4 creases are selected: creases on the spine of the book
and courtesy creases.
- No folding wings.
- 6 mm between the courtesy crease and the crease on the
book's spine.
- Height of cover on the front of the book = height of book.
- Output mode: "Free".
- Cover suction level: Adaptation to the cover to be picked up.
- Glue drying time before nipping: adapted to the thickness of
the book.
- Glue drying time during nipping: adapted to the thickness of
the book.
- Adjustment of pressure on spine: adapted to the thickness of
the book.
- Adjustment of lateral pressure: adapted to the thickness of
the book.
• Miscellaneous settings: - Unit counter mode.
- Vibration activated with the amplitude in the central position.
Note: These parameters may be modified by a qualified technician according to the
customer's requirements.