Canon Océ VarioPrint 6000+ Series マニュアル

MANUALLY PARK SHUTTLE

The shuttle is not parked cor-
rectly. Open the folder cover
and move the shuttle to the
park position. Close the folder
cover. The shuttle will reset.
When the message list is
clear, continue operation.

See 

MISSING STITCHES

The machine has detected
missed stitches. Check if the
stitch wire is jammed or if the
stitch wire spool is empty.

See 

See 

MOTOR CONTROLLER NOT
READY

The drive motor controller is
not ready. If the problem con-
tinues, contact your service
engineer.

 

OPERATOR MAINTENANCE

The machine needs routine
maintenance by the operator.

See 

REBOOT THE MACHINE

Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.

 

REMOVE SET FROM FOLD
AREA

Open the folder cover and re-
move the set.

 

REMOVE SET - GATHERING
AREA

Open the gathering area and
remove the sheets.

 

REMOVE SET - STITCH AREA

Open the folder cover and re-
move the set.

See 

Rotate axis moving

The rotate axis is moving. This
message clears when the ad-
justment is complete.
If the message does not clear,
touch 

 

ROTATE - No comms

Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.

 

4