Canon Océ VarioPrint 6000+ Series 手册
Problem
Cause
Solution
MANUALLY PARK SHUTTLE
The shuttle is not parked cor-
rectly. Open the folder cover
and move the shuttle to the
park position. Close the folder
cover. The shuttle will reset.
When the message list is
clear, continue operation.
rectly. Open the folder cover
and move the shuttle to the
park position. Close the folder
cover. The shuttle will reset.
When the message list is
clear, continue operation.
See
MISSING STITCHES
The machine has detected
missed stitches. Check if the
stitch wire is jammed or if the
stitch wire spool is empty.
missed stitches. Check if the
stitch wire is jammed or if the
stitch wire spool is empty.
See
See
MOTOR CONTROLLER NOT
READY
READY
The drive motor controller is
not ready. If the problem con-
tinues, contact your service
engineer.
not ready. If the problem con-
tinues, contact your service
engineer.
OPERATOR MAINTENANCE
The machine needs routine
maintenance by the operator.
maintenance by the operator.
See
REBOOT THE MACHINE
Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
REMOVE SET FROM FOLD
AREA
AREA
Open the folder cover and re-
move the set.
move the set.
REMOVE SET - GATHERING
AREA
AREA
Open the gathering area and
remove the sheets.
remove the sheets.
REMOVE SET - STITCH AREA
Open the folder cover and re-
move the set.
move the set.
See
Rotate axis moving
The rotate axis is moving. This
message clears when the ad-
justment is complete.
If the message does not clear,
touch
message clears when the ad-
justment is complete.
If the message does not clear,
touch
ADVANCED > RE REF.
ROTATE - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
4
Error Messages
Chapter 6 - Error Conditions, Problems and Solutions
81