Olympus e-3 取り扱いマニュアル

55

EN

You can register a frequently used AF target mode and the position of that AF target. You can 
then quickly load that registered setting (“home position”) and use it when shooting.

gP. 54), press the < button 

and F button at the same time.

• The home position is registered at the time the buttons 

are pressed.

• The home position cannot be registered when 

operated from a menu.

To use this function, you must assign the [

P HOME] function to the < button in advance. 

g“; FUNCTION” (P. 92)

< button.

• The registered home position is selected. Press this button again to switch to the original AF 

target mode.

x

• The AF sensitivity is not recorded when registering the home position.

The camera’s auto focus may not be able to focus on the subject in situations such as when 
the subject is not in the center of the frame. If this happens, the easiest solution is to use 
focus lock. Use this when composing the subject outside of the 11 AF targets or when the 
subject is difficult to focus on.

• The focus is locked. The AF confirmation 

mark and the AF target in focus light up in the 
viewfinder.

• If the AF confirmation mark blinks, press the 

shutter button halfway again.

• While the shutter button is being pressed, the 

super control panel disappears.

k If correct focus cannot be obtained

Indicates that the AF target 
is being registered.

Card access 
lamp

Shutter button

s0011_e_00_0_unified.book  Page 55  Wednesday, September 12, 2007  4:46 PM