Olympus e-3 入門マニュアル
59
EN
4
Focusing and shooting functions
The remote control lamp does not blink after the shutter button on the remote control
is pressed:
is pressed:
j The transmitted signal may not be effective if the remote control receiver is exposed to powerful
lighting. Move the remote control closer to the camera and press the shutter button on the remote
control again.
control again.
j The transmitted signal may not be effective if the remote control is too far from the camera. Move
the remote control closer to the camera and press the shutter button on the remote control again.
j There is signal interference. Change the channel as described in the remote control’s manual.
To cancel the remote control shooting mode:
j The remote control shooting mode will not be canceled after shooting. Press the </Y/j button
to set to [o] (single-frame shooting), etc.
To use the shutter button on the camera in the remote control shooting mode:
j The shutter button on the camera still works even in the remote control shooting mode.
x
Notes
• The shutter will not be released if the subject is not in focus.
• Under bright light conditions, the remote control lamp may be difficult to see, making it hard to
• Under bright light conditions, the remote control lamp may be difficult to see, making it hard to
determine whether or not the picture has been taken.
• Zoom is not available on the remote control.
Bulb shooting with the remote control
Set the shooting mode to [A].
g“Bulb shooting” (P. 44)
You can select the interval from the time the mirror is raised until the shutter is released. This
diminishes camera shake caused by vibrations when the mirror moves. This feature can be
useful in astrophotography and microscope photography or other photographic situations
where a very slow shutter speed is used, and camera vibration needs to be kept to a
minimum.
diminishes camera shake caused by vibrations when the mirror moves. This feature can be
useful in astrophotography and microscope photography or other photographic situations
where a very slow shutter speed is used, and camera vibration needs to be kept to a
minimum.
1
MENU[X][ANTI-SHOCKz]
2
Select from 1 to 30 seconds for the time after the mirror is raised until the shutter
is released and press the
is released and press the
i button.
3
Anti-shock is added to the shooting functions individually (single-frame shooting,
sequential shooting, self-timer shooting, and remote control shooting). For the
setting method, see “Sequential shooting” (
sequential shooting, self-timer shooting, and remote control shooting). For the
setting method, see “Sequential shooting” (
gP. 56).
TIPS
Anti-shock
Press the W button on the remote
control to open the shutter.
When the time set in “BULB
TIMER” (
control to open the shutter.
When the time set in “BULB
TIMER” (
gP. 96) elapses, the
shutter closes automatically.
Press the T button to close the
shutter.
shutter.
s0011_e_00_0_unified.book Page 59 Wednesday, September 12, 2007 4:46 PM