Olympus e-3 入門マニュアル

93

EN

V]

Press the 

< button to acquire the WB value. g“Setting the one-touch white 

balance” (P. 65)

P HOME]

Press the 

< button to switch to the registered AF home position. Press the button 

again to switch to the original AF target mode. 

g“Registering an AF target 

mode” (P. 55)

Press the 

< button to switch AF mode to [MF]. Press the button again to switch to 

the original AF mode.

[RAWK]

Press the 

< button to switch from JPEG to RAW+JPEG or from RAW+JPEG to 

JPEG for the record mode.
You can change the record mode by turning the main dial/sub dial while holding down 
the 

< button.

[P/A/S/M]

You can change the shooting mode by turning the main dial/sub dial while holding 
down the 

< button.

Pressing the shutter button while pressing the 

< button enables you to check the 

picture you have just taken on the monitor without having to record the picture to the 
card. This is useful when you want to see how a picture turned out without saving it.

While holding down the 

< button, you can take pictures using the camera settings 

registered in the [MY MODE SETUP]. 

g“MY MODE SETUP” (P. 93)

[L]

Press the 

< button to switch to under water wide and to switch between under water 

wide and under water macro. Alternatively, turn the main dial while holding down the 

MODE button to select under water wide or under water macro. g“Under water 

wide/macro shooting” (P. 44)

Does not allow function allocation.

You can store two frequently used settings as My Mode. There are two basic ways to shoot 
with the registered My Mode settings.
• Use  the 

MODE button to make the settings. g“My Mode shooting” (P. 44)

• Assign [MY MODE SETUP] to the 

< button. g“; FUNCTION” (P. 92)

To shoot with My Mode using the 

< button, follow the steps under “Executing” below and 

set the My Mode you will use in advance.

Registering
1) Select [MY MODE1] or [MY MODE2] and press 

d.

2) Select [SET] and press the 

i button.

• The current settings are registered in the camera. For details on the functions that can 

be registered to My Mode, refer to “Functions that can be registered with My Mode and 
Custom Reset Setting” (

gP. 134).

• To cancel the registration, select [RESET].

Executing
1) Select [MY MODE1] or [MY MODE2] and press the 

i button.

2) Select [YES] and press the 

i button.

• The selected My Mode is set.
• When shooting, press the shutter button while holding down the 

< button.

s0011_e_00_0_unified.book  Page 93  Wednesday, September 12, 2007  4:46 PM