Olympus e-3 入門マニュアル

94

EN

The direct button may remain selected even after it is released.

Available only when the button is pressed.

[3SEC]/[5SEC]/[8SEC] The button remains selected during the number of seconds 

indicated.

The button remains selected until you press it again.

• Buttons that can be set with [BUTTON TIMER]

ISO, F, WB, #, w, MODE, G, AF, BKT, </Y/j

A

You can switch the functions of the 

AEL/AFL button and the < button. When you select 

[ON], the 

AEL/AFL button will function as the < button, and the < button will function as 

the 

AEL/AFL button.

• The setting also applies to the 

< button on the optional power battery holder when 

attached to the camera.

Custom Menu 1c RELEASE/j

Normally, this camera does not release the shutter while the AF is operating or the flash is 
charging. If you want to release the shutter without waiting until these operations have 
completed, use the setting below. You can set the release priority individually in AF mode.
RLS PRIORITY S Sets release priority for S-AF mode 

gP. 51.

RLS PRIORITY C Sets release priority for C-AF mode 

gP. 52.

O

You can set the number of pictures shot in one second when using sequential shooting with 
[O] from [1fps] to [4fps].

Custom Menu 1d DISP/

8/PC

8

You can turn off the beep sound that is emitted when the focus locks by pressing the shutter 
button.

After a specified period of time elapses with no operations being performed, the camera 
enters the sleep mode (stand-by) to save battery power. After the super control panel is 
displayed for a specified period of time, the backlight turns off. After a specific period of time 
has further passed, the camera enters sleep mode. [SLEEP] lets you select sleep timer from 
[1MIN], [3MIN], [5MIN], or [10MIN]. [OFF] cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button, arrow pad, 
etc.).

s0011_e_00_0_unified.book  Page 94  Wednesday, September 12, 2007  4:46 PM