Olympus e-3 入門マニュアル

96

EN

Custom Menu 1e EXP/

e/ISO

You can select the EV step for exposure parameter setting, such as shutter speed, aperture 
value, or exposure compensation value, from [1/3EV], [1/2EV], or [1EV].

You can select the EV step of the ISO sensitivity from [1/3EV] or [1EV].

You can set the upper limit and default ISO values when ISO is set to [AUTO].

This sets the upper limit of the ISO value that automatically changes. The upper limit 
can be set from 100 to 3200 in 1/3 EV increments.

This sets the value to be normally used when the optimum exposure can be obtained. 
The value can be set from 100 to 3200 in 1/3 EV increments.

You can set the shooting mode in which the ISO [AUTO] setting is activated.

[P/A/S]

In P/A/S mode, the [AUTO] setting is activated. When [AUTO] is set in other 
shooting modes, ISO 100 is set.

The [AUTO] setting is activated for all shooting modes. The ISO is automatically 
selected to obtain the optimal ISO even in M mode.

You can set the metering mode when pressing the 

AEL/AFL button to lock the exposure.

• [AUTO] performs metering in the mode selected under [METERING].

You can select the maximum time (in minutes) for bulb shooting.

Custom Menu 1f 

# CUSTOM

#X-SYNC.

You can set the shutter speed that will be used when the flash fires. The speed can be set 
from 1/60 to 1/250 in 1/3 EV increments.
• For details on the synchronization speed of commercially available flashes, refer to their 

manuals.

#SLOW LIMIT

You can set the slow limit of the shutter speed that will be used when the flash fires. The 
speed can be set from 1/30 to 1/250 in 1/3 EV increments.

w+F

When set to [ON], it will be added to the exposure compensation value and flash intensity 
control will be performed.

s0011_e_00_0_unified.book  Page 96  Wednesday, September 12, 2007  4:46 PM