Olympus E-520 取り扱いマニュアル

74

EN

The flash intensity can be adjusted from +3 to -3.
In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may 
get better results by adjusting the amount of light emitted by the flash (“flash intensity”). It is 
useful when you intend to increase the contrast (distinction between light and dark) of images 
to make the images more vivid.

x

• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera’s flash 

intensity setting.

• When [w+F] is set to [ON], the flash intensity value will be added to the exposure 

compensation value. 

g“w+F” (P. 95)

The camera shoots multiple frames, changing the amount of light emitted by the flash for 
each shot. The camera shoots 3 frames at a time with the following amount of light: optimum 
light, light adjusted in the – direction, and light adjusted in the + direction.

• The compensation value will change according to the EV 

step. 

g“EV STEP” (P. 94)

• In single-frame shooting, the amount of light emitted by 

the flash changes every time the shutter button is 
pressed.

• In sequential shooting, hold down the shutter button until 

the selected number of frames are taken.

• Releasing the shutter button stops flash bracketing 

shooting. When it stops, 

0 is displayed in green on 

the super control panel.

# + Fj

i

p: [w]

MENU[X][w]

MENU[X][FL BKT]

F button

j

# button

s0018_e_00_0_unified.book  Page 74  Tuesday, March 18, 2008  4:08 PM