Olympus E-520 取り扱いマニュアル

ページ / 148
76
EN
Flash shooting
7
x
Notes
• The built-in flash cannot be used when an external flash is attached to the hot shoe.
Super FP flash
Super FP flash is available with the FL-50R or FL-36R. Use 
the Super FP flash where normal flashes cannot be used 
with high shutter speed.
Fill-in flash shooting with the aperture open (such as in 
outdoor portrait shooting) is also possible with Super FP 
flash. For details, refer to the external flash’s manual.
Wireless flash shooting is possible with the Olympus wireless RC flash system. With this 
wireless flash system, you can take pictures using multiple wireless flashes and control the 
flashes in three groups (A, B, and C). The built-in flash is used to communicate between the 
camera and the external flashes.
For details on using the wireless flash, see the manual of the external flash.
Wireless flash setup range
Position the wireless flash so that the wireless sensor faces the camera. The setup range 
guidelines are as shown below. The range changes according to the surrounding 
environment.
1
Position the flash while referring to the “Wireless flash setup range”, and turn on 
the flash.
2
Press the MODE button on the flash to set it to RC mode, and set the channel and 
group of the flash.
Shooting with the Olympus wireless RC flash system
2008. 08.16
arge
Normal
OFF
FP
Super FP flash
5m
50
50°
100
100°
50
50°
10m
30
30°
30
30°
60
60°
50°
100°
50°
30°
30°
60°
Direction of 
the emitted 
flash
Remote sensor
Direction of 
the camera
s0018_e_00_0_unified.book  Page 76  Tuesday, March 18, 2008  4:08 PM