Olympus E-520 取り扱いマニュアル

95

EN

You can set the metering mode when pressing the 

AEL/AFL button to lock the exposure.

• [AUTO] performs metering in the mode selected under [METERING].

You can select the maximum time (in minutes) for bulb shooting.

Custom Menu 1f 

# CUSTOM

#X-SYNC.

You can set the shutter speed that will be used when the flash fires. The speed can be set 
from 1/60 to 1/180 in 1/3 EV increments.
• For details on the synchronization speed of commercially available flashes, refer to their 

manuals.

#SLOW LIMIT

You can set the slow limit of the shutter speed that will be used when the flash fires. The 
speed can be set from 1/30 to 1/180 in 1/3 EV increments.

w+F

When set to [ON], it will be added to the exposure compensation value and flash intensity 
control will be performed.

In 

AUTO or scene mode, the built-in flash pops up automatically in low light or backlight 

conditions. When set to [OFF], the built-in flash will not pop up automatically.

Custom Menu 1g K/COLOR/WB

ALL >

You can apply the same compensation value to all the white balance modes at once.

The same compensation value applies to all WB modes.

[ALL RESET] The WB compensation value settings applied to each WB mode are all 

cleared at once.

If you select [ALL SET]
1) Use 

bd to select the color direction.

Toward A: Amber-Blue/Toward G: Green-Magenta

2) Use 

ac to set the compensation value. g“WB compensation” (P. 65)

Releasing the 

AEL/AFL button takes a sample image. You can check the white balance 

you have adjusted.

If you select [ALL RESET]
1) Use 

ac to select [YES].

s0018_e_00_0_unified.book  Page 95  Tuesday, March 18, 2008  4:08 PM